Sony HVL-F32M Flash Light

Sony HVL-F32M Flash Light

$451.44
  • Compatible with Sony ADI / P-TTL
  • Guide Number: 105' at ISO 100 and 105mm
  • Zoom Range: 24-105mm (15mm with Panel)
  • Tilts from -8 to 90°
  • Rotates 180° Right and 90° Left
  • Wireless TTL Controller/Remote Flash
  • LCD Panel & Dust/Water Resistant
  • Recycle Time: 0.1-5 Seconds
  • Slow, High-Speed, 1st & 2nd Curtain Sync
  • Runs on 2 AA Batteries
  • Compact, yet packed of features, the HVL-F32M External Flash from Sony is well-suited for use on mirrorless cameras as well as smaller DSLRs, or for those who are simply looking for a lightweight on-camera lighting solution. The flash balances power and size with a respectable guide number of 105' at ISO 100 and 105mm as well as an auto zoom range of 24-105mm on full-frame cameras, expandable to 15mm with the built-in wide-angle panel. Also, unit can tilt upward 90° as well as rotate 180° right and 90° left for bouncing light in horizontal and vertical shooting positions.

    Another benefit of the flash is the ability to use it as either a wireless TTL controller or as a remote flash. This allows users to set up multiple flash units around their subject for more complex lighting setups. The HVL-F32M also has a comprehensive LCD panel on the back for viewing and changing settings as well as a charge progress indicator. Dust and water resistance is also a major feature of this unit along with high-speed, slow, first and second curtain synchronization settings. Additionally, it has a recycle time of 0.1 to 5 seconds and runs on 2 AA batteries. It comes with a terminal protector cap, mini-stand, and carrying case.

    This unit is compatible with Sony's Multi Interface Shoe and is not natively compatible with the older Sony/Minolta Auto-Lock Accessory Shoe. Though, with the use of ADP-AMA Shoe Adapter, Sony cameras with the Auto-Lock Accessory Shoe can be adapted to use Multi Interface Shoe external flashes with full compatibility.

    Advance Distance Integration (ADI) flash metering works with cameras and lenses with distance encoders to more accurately balance flash output with ambient light and subject reflectivity by taking camera-to-subject distance into account
    Continuous flash performance of 40 flashes at 5 Hz with normal flash at 1/32 power and the 105mm setting
    Built-in bounce card for creating catchlights
    Auto zoom function will recognize and adjust for sensor size
    Color temperature of approximately 5500K
    Wireless channel is fixed to channel 1
    Power saving mode
    Charge progress indicator switches from red, orange, yellow, and green to show current status
    Manual flash control from 1/1 to 1/128 power in 1/3 EV steps
    Battery life of about 120-150 flashes
    Locking hot shoe
    Guide Number 104.99' / 32 m at ISO 100 (105 mm Position)
    Coverage Full-Frame
    24 to 105 mm
    15 mm (with Wide-Angle Adapter)
    Angle of Coverage 23.3 to 84°
    110° (with Wide-Angle Adapter)
    Auto Zoom Head Yes
    Bounce Head -8 to +90°
    Swivel Head 270°
    Recycle Time Approx. 0.1 to 5 Seconds
    Secondary Illumination None
    Exposure Control
    Exposure Control Sony ADI / P-TTL
    Flash Modes Hi-Speed Sync, Second-Curtain Sync, Slow Sync
    Power Range 1/1 to 1/128
    Flash Compensation -3 to +3 EV (1/3 EV Steps)
    Wireless
    Wireless Operation Optical Pulse (TTL/Manual)
    Up to 16.4' / 5 m
    Wireless Channels 1
    Wireless Groups 1
    Power
    Internal Power 2 x AA (Alkaline, NiMH)
    External Power Pack Compatible No
    General
    Mount Shoe
    Off-Camera Terminal None
    Dimensions (W x H x D) 2.6 x 4.7 x 3.2" / 66 x 119 x 82 mm
    Weight 8.29 oz / 235 g (without Batteries)
All Products Come with Warranty, For Detail please visit our  Warranty Page
Write Your Own Review
You're reviewing: Sony HVL-F32M Flash Light
Stock Level: Medium Qty.
SKU
HVL-F32M